Tips

Stucco: lime, sand and marble mixture

Stucco: lime, sand and marble mixture


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

A mixture of lime, extremely fine sand and marble powder, this primer with a shiny and smooth appearance gives superb light reflections. If it is a little delicate and tedious to execute, it remains within the reach of a non-professional ... after testing! Widely used in Venetian palaces, it was very popular with the Egyptians and the Romans.

The step by step

Danièle's stucco You will need: For 1 m2: 5 kg of mixed plaster in living rooms and 5 kg of fatty plaster in damp rooms + natural powder pigments; 2 coating knives, rotary mixer mounted on drill. Each craftsman has his magic formula… and secret, long experienced. Do not hesitate to grope, to make multiple tests, because the temperature, the wind or the hygrometry play a preponderant role in the final aspect of the stucco.

1

First of all, you must prepare the support by opening and filling the cracks and by passing a printing layer whose film is not too shiny.

2

Mix your pigments in a little linseed oil to get the consistency of a pancake batter. The pigments must be perfectly diluted to mix properly with the coating.

3

Add your pigments and mix well. Then pass, with a coating knife, a first fluffy layer by making spaced and irregular touches all over the wall, without taking care of the gaps.

4

In the process, pass a second fluffy layer filling the gaps and crushing the reliefs.





5

The next day, make a cross pass from bottom to top over the entire wall.

6

The next day, start shoeing (or tightening): hold your knife almost perpendicular to the wall and pull your stucco in cross passes.

7

Twenty-four hours later and for extra protection and shine, wax your stucco with white wax, before buffing with a soft cloth.

THE PRO COUNCIL

Always work with two coating knives: the first is loaded with plaster, the second is used to take small portions of plaster and spread it on the wall. If a waxed stucco requires a touch-up, unravel it with balsamic turpentine, open the crack, reseal and redo a small part of stucco, before recasting to homogenize the whole. By passing the knife lightly moistened with soapy water and without insisting too much, the stucco takes on a matte appearance. It will become more and more satin if the shoeing is pushed and the knife wet. For a shiny finish, wet the wall with soapy water and tighten firmly.



GOOD TO KNOW

Based on natural and therefore very ecological products, stucco requires a minimum of three passes, applied fresh on fresh to obtain a lasting result. Recently, there has also been "ready-to-use" stucco, the only defect of which is that it gives a slightly plasticized appearance to the decor. Know-how - home decor © La maison rustique - éditions Flammarion, 2006



Comments:

  1. Rangy

    Willingly I accept. In my opinion it is actual, I will take part in discussion.

  2. Ainmire

    It's okay, it's the entertaining piece

  3. Zulkigrel

    Trifles!

  4. Dempster

    Actual blog, fresh info, read :)

  5. Parrish

    I'm sorry, but in my opinion, you are wrong. I am able to prove it. Write to me in PM, discuss it.

  6. Jake

    Yeah ... Life is like riding a bicycle. To keep your balance, you have to move.

  7. Jirka

    Quick Answer)))

  8. Heikkinen

    I think you are wrong. I propose to examine.



Write a message