We are searching data for your request:
Forums and discussions:
Manuals and reference books:
Data from registers:
Upon completion, a link will appear to access the found materials.
Step 1: cleanBefore painting anything, you must absolutely clean your furniture! If you skip this step, you can be sure that the paint will not stick to the support and that it will flake off quickly. Start by cleaning your furniture with a soft, damp cloth. You can optionally add a little washing-up liquid to remove dirt more easily. If you have recovered an old metal piece of furniture with labels stuck on it, you can use acetone or solvent. This will allow you to remove traces of glue that persist on the metal. If you have traces of rust, you can use a wire brush and a little elbow grease to get rid of it. Once dry, your furniture can be sanded. Using an abrasive paper, gently rub the irregularities and the remaining dirt or paint residue. Not only does this allow you to obtain a smoother surface, but in addition, the adhesion of the paint will only be better! Iron with a rag to remove the last residues and you're ready for the next steps!
Step 2: prepareAfter cleaning, you can start preparing the support. That is to say, apply protective layers before painting to make it as resistant as possible. To protect it from rust, you must apply a rust-proofing paintbrush to the entire surface of the metal. You can use a zinc chromate primer which resists corrosion well. Beyond protecting your furniture from rust, this substance is also an excellent adhesive for primer.
After cleaning and preparing the support, it's time to paint! We recommend using a special metal paint, glycerophthalic type, which is more resistant than acrylic paint. Use brushes for small areas and nooks and crannies and a flat brush with soft bristles for larger areas. Cross the passes so that the paint is as uniform as possible. For those who wish, it is also possible to use a spray to apply the paint regularly. Carefully read the instructions for use of the paint chosen to respect the drying time. Once dry, your furniture can receive a second coat of paint. The latter will allow a uniform rendering and will offer additional protection. You just have to wait at least 24 hours for the paint to be completely dry. And here you are with a brand new piece of furniture! For an even more personalized result, consider using stencils or masking tape to customize your furniture. Graphic shapes, legs or different colors painted… Let your imagination run wild!